BLWMW - INDUSTRIAL ACRYLIC EPOXY, 138-1 A & B WHITE
- MSDS: BLWMW
- Manufacturer: CORONADO PAINT COMPANY
- Product Name: INDUSTRIAL ACRYLIC EPOXY, 138-1 A & B WHITE
- National Stock Number: 8010-00N017722
Product Identification
Product ID:INDUSTRIAL ACRYLIC EPOXY, 138-1 A & B WHITE
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017722
MSDS Number: BLWMW
Responsible Party
EDGEWATER, FL 32032
Emergency Phone: 904-428-6461
Info Phone: 904-428-6461
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
PIGMENTS
Fraction By Weight: 25.1%
VEHICLE
Fraction By Weight: 28.7%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 39.0%
ETHANOL, 2-ETHOXY-; (CELLOSOLVE)
CAS: 110-80-5
RTECS: KK8050000
Fraction By Weight: 4.6%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TRIETHYLAMINE
CAS: 121-44-8
RTECS: YE0175000
Fraction By Weight: 2.6%
OSHA PEL 25 PPM/15 STEL
ACGIH TLV: 10 PPM/15 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NIOSH RECOMMENDS THAT 2-ETHOXYETHANOL
BE REGARDED IN THE WORKPLACE AS HAVING THE POTENTIAL TO CAUSE
ADVERSE REPRODUCTIVE EFFECTS IN MALE AND FEMALE WORKERS .
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: INDUCE VOMITING, CALL PHYSICIAN. EYE: WASH WITH SOAP
AND WATER FOR AT LEAST 15 MINUTES. INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE ARTF RESP/O*2) . INGEST: CALL MD
IMMEDIATELY ( ).
Fire Fighting
Flash Point Method:SCC
Flash Point:200F,93C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . TREAT AS CLASS B FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:FLUSH AWAY WITH WATER OR ABSORB ON APPROPRIATE
ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:ONLY TO AVOID EXCESSIVE INHALATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:V4
Boiling Pt:B.P. Text:190F,88C
Vapor Pres:<80
Vapor Density:2.7
Spec Gravity:1.278
Evaporation Rate & Reference:0.6 (N-BUTYL ACETATE=1)
Solubility in Water:INFINITE
Appearance and Odor:WHITE OPAQUE LIQUID; ODOR SLIGHTLY AMMONIACAL.
Percent Volatiles by Volume:59.7
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:FREEZING TEMPERATURES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.